- From
- —
- Lightest
- —
- Builds/sizes
- 5/7
Merida · model family
Merida Reacto
2 variants by frame grade. Compare them part by part below.
- From
- —
- Lightest
- 7.1 kg15.7 lb
- Builds/sizes
- 5/7
Generations
What changed from one generation to the next. Useful when you're weighing a used bike against a new one.
2026-03
REACTO V
- Redesigned from scratch with CFD and four wind-tunnel sessions
- Tyre clearance up from 30 to 32 mm; chainstays 408 to 410 mm
- 1.5 in upper and lower headset bearings (was a smaller lower bearing)
- Zero-offset S-FLEX seatpost, about 100 g lighter than the old 15 mm offset post
- Di2 battery moved from the seatpost to the bottom bracket area
- New TEAM CW 1P one-piece cockpit
- Same geometry as the REACTO IV
Variants side by side
Each variant is shown with its first complete build. Pick other builds on the compare page.
| CF3 (Gen V) | CF5 (Gen V) | |
|---|---|---|
| Overview | ||
| Brand | Merida | Merida |
| Build | REACTO 8000 | REACTO TEAM |
| Build notes | Ultegra Di2 on the CF3 frame, no power meter. Colours: Rainbow Purple/Black and Slate Grey/Black. | Merida calls the TEAM the lightest REACTO V: 203 W in the TOUR wind-tunnel test (211 W for the REACTO IV TEAM) and 7.1 kg in size M. Colours: Halo Green/UD or Slate Grey/Black. Merida's site lists the brakes as 'Sram Red AXS / Shimano Dura Ace'. |
| Bike weight | — | 7.1 kg15.7 lb |
| Weight measured on size | — | M |
| Model year | 2027 | 2027 |
| Generation | 5th generation (REACTO V) | 5th generation (REACTO V) |
| Launched | 2026-03 | 2026-03 |
| Discipline | Aero road | Aero road |
| UCI legal | Not stated | Not stated |
| Verdict (out of 100) | ||
| Aero | 88 | 92 |
| Frame | 78 | 86 |
| Components | 74 | 90 |
| Fit | 76 | 78 |
| Practicality | 76 | 74 |
| Weight | — | 94 |
| Frame & fork | ||
| Frame material | Carbon (CF3) | Carbon (CF5) |
| Fork material | Carbon (MERIDA REACTO CF3 V DISC) | Carbon (MERIDA REACTO CF5 V DISC) |
| Frame weight | 1,185 g2.61 lb | 950 g33.5 oz |
| Weight measured on | Approx., size M (Merida) | Approx., size M (Merida) |
| Max system weight | 120 kg264.6 lb | 120 kg264.6 lb |
| Frame sizes | 3XS, XXS, XS, S, M, L, XL | 3XS, XXS, XS, S, M, L, XL |
| Colours | Rainbow Purple/Black, Slate Grey/Black, Halo Green/Pearl White, Passion Red (Slate Grey), Silk Black (Gunmetal Grey), Starfield Purple (Slate Grey), Pearl/Blue (Teal), Purple (White), Halo Green (Slate Grey), Mineral Gold (Black) (depending on build) | Halo Green/UD, Slate Grey/Black, Black/Mineral Gold, Passion Red/Slate Grey, Vanilla/Passion Red, Effect Silver/UD (depending on build) |
| Also available as | REACTO CF5 V: same geometry, aero performance and stiffness with a lighter carbon lay-up (approx. 950 g frame in size M) | REACTO CF3 V: same geometry, aero performance and stiffness with a cheaper carbon lay-up (approx. 1,185 g frame in size M) |
| Compatibility & standards | ||
| Brake type | Disc | Disc |
| Wheel size | 700c | 700c |
| Max tire width | 32 mm | 32 mm |
| Bottom bracket standard | PF86.5 (BB86.5 press-fit) | PF86.5 (BB86.5 press-fit) |
| Front axle | 12x100 thru-axle | 12x100 thru-axle |
| Rear axle | 12x142 thru-axle | 12x142 thru-axle |
| Mechanical shifting possible | Yes | — |
| 1x compatible | Yes | Yes |
| Front derailleur mount | Removable front derailleur mount | Removable front derailleur mount |
| Cable routing | Internal | Internal |
| Electronic battery location | Bottom bracket area | Bottom bracket area |
| Hydration & storage | ||
| Bottle mounts | 2 | 2 |
| Fit & adjustability | ||
| Cockpit | One-piece bar and stem on the 8000 (Vision Metron 5D ACR EVO), 7000 and 6000 (MERIDA TEAM SL 1P); separate alloy bar and stem on the 5000 and 4000 | One-piece bar and stem: MERIDA TEAM CW 1P (10K, ONE), Vision Metron 5D ACR EVO (TEAM, 9000) or MERIDA TEAM SL 1P (PRO) |
| Seatpost type | MERIDA REACTO V S-FLEX carbon aero post, 0 mm setback, with a flex cut-out; clamp at the back of the seat tube | MERIDA REACTO V S-FLEX carbon aero post, 0 mm setback, with a flex cut-out; clamp at the back of the seat tube |
| Fit notes | Stock bar width is 380 mm (3XS-S), 400 mm (M-L) or 420 mm (XL), with stems from 90 to 120 mm by size. The frame also takes other MERIDA and FSA ACR cockpits. | Stock bar width is 380 mm (3XS-S), 400 mm (M-L) or 420 mm (XL), with stems from 90 to 120 mm by size; the TEAM CW 1P is sold in 380, 400 and 420 mm widths with 90-140 mm stems. Its widths are measured centre to centre in the drops; at the hoods they are 305, 325 and 345 mm, and only the 420 (345/420) and a newer 345/380 option (10° flare instead of 17°) meet the UCI cockpit rules in force since 2026. The frame also takes other MERIDA and FSA ACR cockpits. |
| Aerodynamics | ||
| Manufacturer aero claims | Merida says the CF3 frame matches the CF5 frame's aero performance and stiffness | TOUR magazine wind-tunnel standard (45 km/h, pedalling mannequin, varying yaw): 196 W for the REACTO ONE (197 W with the UCI-compliant cockpit), 202 W for the 10K and 203 W for the TEAM, versus 211 W for the REACTO IV TEAM |
| Testing method | — | Hundreds of CFD iterations, four wind-tunnel sessions, in-house and Zedler Institute lab testing, and a velodrome test to settle the handlebar shape and rider position |
| Tube profile | Large sail-like surfaces on the head tube and down tube joined by slim sections; deeper, thinner fork legs; the down tube sits further from the front wheel | Large sail-like surfaces on the head tube and down tube joined by slim sections; deeper, thinner fork legs; the down tube sits further from the front wheel |
| Travel, maintenance & warranty | ||
| Headset bearings | 1.5 in upper and lower bearings (FSA ACR on the 8000, MERIDA TEAM SL on the other builds) | 1.5 in upper and lower bearings, FSA ACR |
| Derailleur hanger | Proprietary (Merida DH-067 for Shimano direct mount, DH-068 for other road derailleurs) | Proprietary (Merida DH-067 for Shimano direct mount, DH-068 for other road derailleurs) |
| Maintenance | Standard PF86.5 bottom bracket, FSA ACR headset and 12 mm thru-axles. The Di2 battery sits in the bottom bracket area, reachable without removing major parts. The seatpost clamp is at the back of the seat tube, and the power meter cadence magnet sits under the chain-suck protector. | Standard PF86.5 bottom bracket, FSA ACR headset and 12 mm thru-axles. The Di2 battery sits in the bottom bracket area, reachable without removing major parts. The seatpost clamp is at the back of the seat tube, and the power meter cadence magnet sits under the chain-suck protector. |
| Proprietary parts | S-FLEX seatpost and clamp, one-piece cockpit (on the 8000, 7000 and 6000), derailleur hanger, disc coolers | S-FLEX seatpost and clamp, one-piece cockpit, derailleur hanger, disc coolers |
| Sold via | Through Merida dealers | Through Merida dealers |
| Drivetrain | ||
| Groupset | Shimano Ultegra Di2 R8100 | Shimano Dura-Ace Di2 R9200 |
| Launched | 2021 · current generation | 2021 · current generation |
| Speeds | 12-speed | 12-speed |
| Electronic | Yes | Yes |
| Drivetrain | 2x | 2x |
| Shifters | Shimano Ultegra Di2 | Shimano Dura-Ace Di2 |
| Crankset | Shimano Ultegra | Shimano Dura-Ace R9200-P (power meter) |
| Chainrings | 52/36 | 52/36 |
| Crank lengths available | 160 mm (3XS), 165 mm (XXS-XS), 170 mm (S-M), 172.5 mm (L-XL) | 160 mm (3XS), 165 mm (XXS-XS), 170 mm (S-M), 172.5 mm (L-XL) |
| Power meter | — | Shimano Dura-Ace R9200-P |
| Launched | — | 2021 · current generation |
| Measurement | — | Dual-sided |
| Bottom bracket | Shimano SM-BB71-41B | Shimano SM-BB92-41B |
| Standard | Pressfit 86.5 | Pressfit 86.5 |
| Front derailleur | Shimano Ultegra Di2 | Shimano Dura-Ace Di2 |
| Rear derailleur | Shimano Ultegra Di2 | Shimano Dura-Ace Di2 |
| Cassette | Shimano Ultegra R8101 | Shimano Dura-Ace R9200 |
| Range | 11-30 | 11-30 |
| Speeds | 12-speed | 12-speed |
| Chain | Shimano CN-M6100 | Shimano CN-M9100 |
| Brakes | ||
| Brake levers | Shimano Ultegra | Shimano Dura-Ace |
| Brake calipers | Shimano Ultegra | — |
| Type | Hydraulic, 2-piston | — |
| Rotors | Shimano RT-CL800 | Shimano RT-CL900 |
| Front rotor | 160 mm | 160 mm |
| Rear rotor | 160 mm | 160 mm |
| Mount | Center Lock | Center Lock |
| Wheels & tires | ||
| Wheelset | Reynolds AR 60 DB | Vision Metron 60 RS |
| Front rim depth | 60 mm | 60 mm |
| Rear rim depth | 60 mm | 60 mm |
| Internal rim width | 21 mm | 23 mm |
| Material | Carbon | Carbon |
| Tubeless ready | — | Yes |
| Notes | Center Lock | Tubeless tape and valves not included |
| Tires | Continental Grand Prix 5000 S TR | Continental Grand Prix 5000 S TR |
| Tire width | 28 mm | 28 mm |
| Type | Tubeless ready, folding | Tubeless ready, folding |
| Cockpit | ||
| Handlebar | Vision Metron 5D ACR EVO | Vision Metron 5D ACR EVO |
| Type | One-piece bar and stem | One-piece bar and stem |
| Integrated stem | Yes | Yes |
| Widths available | 380 mm (3XS-S), 400 mm (M-L), 420 mm (XL) | 380 mm (3XS-S), 400 mm (M-L), 420 mm (XL) |
| Material | Carbon | Carbon |
| Notes | Stem length by size: 90 mm (3XS-XS), 100 mm (S), 110 mm (M-L), 120 mm (XL) | Stem length by size: 90 mm (3XS-XS), 100 mm (S), 110 mm (M-L), 120 mm (XL) |
| Headset | FSA No.55R ACR | FSA No.55R ACR |
| Saddle & seatpost | ||
| Saddle | Prologo Scratch M5 | Prologo Nago R4 PAS Nack |
| Seatpost | Merida REACTO V S-FLEX | Merida REACTO V S-FLEX |
| Offset / setback | 0 mm setback | 0 mm setback |
| Material | Carbon | Carbon |
| Bar tape | Merida Road Expert | One-Touch |
| Geometry (smallest – largest size) | ||
| Sizes | 3XS, XXS, XS, S, M, L, XL | 3XS, XXS, XS, S, M, L, XL |
| Stack | 512–593 mm20.2–23.3″ | 512–593 mm20.2–23.3″ |
| Reach | 373–409 mm14.7–16.1″ | 373–409 mm14.7–16.1″ |
| Seat tube angle | 73–75.5° | 73–75.5° |
| Head tube angle | 70.5–74° | 70.5–74° |
| Head tube length | 100–175 mm3.9–6.9″ | 100–175 mm3.9–6.9″ |
| Effective top tube | 506–590 mm19.9–23.2″ | 506–590 mm19.9–23.2″ |
| Seat tube length | 440–590 mm17.3–23.2″ | 440–590 mm17.3–23.2″ |
| Chainstay | 410 mm16.1″ | 410 mm16.1″ |
| Wheelbase | 981–1,011 mm38.6–39.8″ | 981–1,011 mm38.6–39.8″ |
| BB drop | 66–70 mm2.6–2.8″ | 66–70 mm2.6–2.8″ |
| Fork length | 385 mm15.2″ | 385 mm15.2″ |
| Fork offset | 45 mm1.8″ | 45 mm1.8″ |
| Standover | 727–853 mm28.6–33.6″ | 727–853 mm28.6–33.6″ |
| Stem length | 90–120 mm3.5–4.7″ | 90–120 mm3.5–4.7″ |
| Handlebar width | 380–420 mm15–16.5″ | 380–420 mm15–16.5″ |
Geometry overlay
Drawn to scale (how to read it).